How to Replace the Battery in Your Ford F-150 Flip Key (2015-2021)

Is your Ford F-150 key fob not working as it should? A quick battery replacement can fix it! Follow this simple guide to get your key fob back in action.

Signs Your Key Fob Battery Needs Replacing

• Key fob works only sometimes.
• Shorter range for locking/unlocking.
• No response when pressing buttons.
• "Low Key Battery" message on your dashboard.

What You’ll Need

• A small flathead screwdriver or coin.
• A CR2032 battery (available online or at most stores).

Step-by-Step Instructions

1. Open Your Key Fob

Look for the small notch along the side of your flip key. Use a coin or flathead screwdriver to gently pry it open.

2. Take Out the Old Battery

Carefully remove the old CR2032 battery. Remember to note which side (usually the "+") is facing up.

3. Insert the New Battery

Place the new CR2032 battery in the same orientation as the old one. Ensure it fits snugly.

4. Snap the Key Fob Back Together

Align the two halves of your fob and press them together until they click securely.

5. Test the Key Fob

Stand near your Ford F-150 and press the buttons. If it locks, unlocks, and starts your truck, you’re good to go!

Pro Tips

• Always keep an extra CR2032 battery on hand for emergencies.
• Avoid touching the battery's flat surfaces to prevent reducing its life.
• Refer to your owner’s manual for more details if needed.

Still having trouble? Your key fob might need reprogramming or further repair. Contact Sam Locksmith for professional help in Pensacola and surrounding areas. We’re here to keep your keys working smoothly!